Epoxy Mortars
Epoxy Mortars
Severely abused, eroded and rough floors can be restored or upgraded with Protective Industrial Polymers' complete line of resurfacing toppings. Substrates exposed to a wide range of use require a full line of options. Epoxy, urethane, cementicious and elastomeric mortars are produced as both self leveling slurry and trowel applied mortars.
Protect 3000 EM
Epoxy Mortar System
Protect 3000 EM is a 100% solids epoxy mortar system designed for restoring old or damaged concrete by creating a dense protective layer. This general service mortar is uniquely chemical-resistant and is ideally suited for industrial applications where a compacted, epoxy mortar is specified. Application thickness: 3/16" to 1/4".
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate
Protect 3100 RR
Resin-Rich Epoxy Mortar System
Protect 3100 RR is a 100% solids, resin-rich epoxy mortar. This system is designed primarily for power trowel at an application thickness of 3/16" to 1/4". Protect 3100 RR is suited for industrial applications where a densely compacted resin-rich epoxy mortar is specified to elevate abrasion and chemical resistance properties.
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate
Protect 3100 RG
Environmentally-Friendly Resin-Rich Epoxy Mortar System
Protect 3100 RG is a 100% solids, environmentally-friendly, resin-rich epoxy mortar. This system is primarily designed for power trowel at an application thickness of 3/16" to 1/4". Protect 3100 RG utilizes over 35% recycled glass materials, thereby meeting LEED point qualifications.
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate
Protect 3600 MA
Modified Anime Epoxy Mortar System
Protect 3600 MA is a 100% solids epoxy mortar with a modified amine curing agent specially designed to efficiently wet aggregate, enabling higher aggregate-to-binder ratios, yet still producing a very dense, closed surface. Protect 3600 MA is easily hand or power troweled at a 3/16" to 1/4" thickness. This system can be extended to be used in deep fill applications up to a 4" thickness.
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate
Protect 3610 ESR
Epoxy Slurry Resurfacer
Protect 3610 ESR is a 100% solids, pigmented epoxy-slurry mortar system. Protect 3610 ESR can be applied with a notched squeegee or slurry/cam rake at an application thickness of 60 to 90 mils. This product is suitable for industrial applications where a slurry is specified to rebuild slightly damaged concrete.
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate
Protect 3700 SR
Solvent-Resistant Epoxy Mortar System
Protect 3700 SR is a 100% solids, highly chemical-resistant, mortar system designed specifically for use in solvent exposure areas. Protect 3700 SR can be hand or power troweled. Applied at an application thickness of 3/16" to 1/2".
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate
Protect 3800 TSR
Thermal Shock Epoxy Mortar System
Protect 3800 TSR is a 100% solids, epoxy mortar system designed for restoring areas exposed to moderate temperature cycling. Protect 3800 TSR can be hand trowel or power trowel applied at an application thickness of 3/16" to 1/4". This product is suited for general food, dairy and beverage applications where a urethane concrete is not required.
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate
Protect 3900 SF
Steel-Filled Epoxy Mortar System
Protect 3900 SF is a 100% solids, steel reinforced, resin-rich, epoxy mortar system. Protect 3900 SF serves applications requiring extreme abrasion and impact protection combined with chemical resistance. Suited for applications where there is repetitive, abrasive industrial traffic loads. Application thickness: 3/16" to 1/4".
Data Sheet MSDS Part A MSDS Part B MSDS Pigment MSDS Aggregate MSDS Steel