Antimicrobial Flooring

Protective Industrial Polymers manufactures a complete line of antimicrobial flooring products designed for use in various sensitive industries, including food and beverage, pharmaceutical and healthcare.

Our antimicrobial additives are integral key ingredients in our products, not merely a surface treatment. All our antimicrobial flooring products are protected against bacterial and fungal growth. The antimicrobial properties of these products will remain effective for the life of the system, even after repeated washings, sanitizations and decontaminations

Your concrete floor is a naturally porous material that can provide an ideal environment for harmful microbes to thrive.  Water seeping into the crevices of the concrete provides a key element for nurturing another source of contamination right under your feet.  Also, applying an antimicrobial colloidal pre-treatment product prior to installation of a polymer coating or resurfacing system will help control this potential source of contamination.

We will work closely with our contractor partners to install antimicrobial flooring that meets your requirements throughout your facility.

New Call-to-action

Looking for Turnkey Flooring Systems?

New Call-to-action

New Call-to-action

Protect AM-PT

Antimicrobial Concrete Pretreatment
Protect AM-PT is a clear in situ antimicrobial concrete flooring treatment developed to create a permanent dense colloidal gel that extremely limits slab permeability. Protect AM-PT penetrates deeply into the concrete substrate and reacts with free alkali and/or alkaline hydrates internally producing an extremely dense silica hydro-gel that fills the micro spaces and voids around aggregate. This hydro-gel permanently seals the matrix blocking water, vapor or contaminant movement.

(Click links below to view files)

Technical Data Sheet

SDS

Protect AM-PT-BW

Antimicrobial Concrete Pretreatment for Block& Walls
Protect AM-PT-BW is a clear,. antimicrobial subsurface treatment developed to create a permanent dense colloidal gel that extremely limits permeability when used in vertical concrete or concrete block. Protect AM-PT-BW penetrates the concrete substrate and reacts with free alkali and/or alkaline hydrates internally producing an extremely dense silica hydro-gel with antimicrobial and antifungal properties that fills the micro spaces and voids around aggregate or in block. This hydro-gel permanently seals the matrix blocking water, vapor or contaminant movement.

(Click links below to view files)

Technical Data Sheet

SDS

Protect 1000 AM

Antimicrobial Epoxy Coating System
Protect 1000 AM is a two or three-component (when pigmented), universal, 100% solids, antimicrobial epoxy resin coating system that can be applied as a clear or pigmented coating or primer. Protect 1000 AM is supplied with an antimicrobial curing agent. This product produces a gloss finish.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B        

SDS-Pigment

Protect 1000 AM-HC

Antimicrobial High Clarity Clear Epoxy Coating System
Protect 1000 AM -HC a two component, 100% solids, high clarity antimicrobial epoxy resin coating system designed specifically for use in decorative flooring systems where an extremely transparent, clear, epoxy basecoat or topcoat is required. Protect 1000 AM-HC is supplied with an antimicrobial curing agent. This product produces a smooth gloss finish.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B

Protect 1200 AM-WR

Antimicrobial Water-Reducible Epoxy System
An antimicrobial, economical, two-component, water-reducible epoxy coating. Protect 1200 AM-WR is to be applied as an epoxy primer or an epoxy top coat. This product produces a gloss finish.

(Click links below to view files)

Technical Data Sheet

SDS-A        

SDS-B        

SDS-Pigment

Protect 1800 AM Flex

Antimicrobial Flexible Epoxy Resin System
An antimicrobial three-component, flexible epoxy and urethane hybrid coating. Protect 1800 AM Flex is applied as a membrane and/or broadcast with aggregate to form a flexible impact resistant wear course. Protect 1800 AM Flex has been modified with an antimicrobial component that is integral to the manufactured product. The product is protected against bacterial and fungal growth. The antimicrobial properties will remain effective for the life of the product.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B        

SDS-Pigment

Protect 2100 AM

Antimicrobial, UV Protective, Low-Odor, High-Solids, High-Gloss Urethane
Protect 2100 AM is a high-solids, high-gloss, two or three-component antimicrobial and UV protective polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor. Protect 2100 AM is also formulated with UV inhibitors to greatly reduce damaging UV rays from penetrating and yellowing an epoxy basecoat when applied as a clear coat. Protect 2100 AM is recommended as the antimicrobial clear finishing coat on decorative flake, quartz or metallic pigmented flooring systems. Protect 2100 AM may also be pigmented on applications requiring a solid color antimicrobial urethane topcoat.

(Click links below to view files)

Technical Data Sheet

SDS-A        

SDS-B        

SDS-Pigment

Protect 2100 AM Satin

Antimicrobial, UV Protective, Low-Odor, High-Solids, Satin Urethane
Protect 2100 AM Satin is a high-solids, satin finish, two or three-component antimicrobial and UV protective polyurethane coating. It can be applied over an epoxy primer or used to recoat an existing epoxy or urethane floor. Protect 2100 AM Satin is also formulated with UV inhibitors to greatly reduce damaging UV rays from penetrating and yellowing an epoxy basecoat when applied as a clear coat. Protect 2100 AM Satin is recommended as the antimicrobial clear finishing coat on decorative flake, quartz or metallic pigmented flooring systems. Protect 2100 AM Satin may also be pigmented on applications requiring a solid color antimicrobial urethane topcoat.

(Click links below to view files)

Technical Data Sheet

SDS-A        

SDS-B

SDS-Pigment

Protect 4300 AM

Antimicrobial Polyaspartic Coating
A two or three-component (when pigmented), 100% solids, antimicrobial modified aliphatic/polyaspartic floor coating material that exhibits fast cure, excellent UV resistance and has virtually no odor. Protect 4300 AM is an ideal coating for use in decorative applications where a rapid cure, UV resistant, low odor, high build coating is desired. Protect 4300 AM exhibits good resistance to the most common chemicals, has zero VOC’s and meets all USDA guidelines for use in federally inspected facilities.

(Click links below to view files)

Technical Data Sheet

SDS-A        

SDS-B        

SDS-Pigment

Protect AM-UC-SM

Antimicrobial Slurry Grade Heavy Duty Urethane Concrete Mortar
Protect AM-UC-SM is a self-priming, three or four (with colorpack) component, slurry grade, antimicrobial, Heavy Duty Urethane Concrete Mortar. Protect AM-UC-SM is typically installed at 3/16” to 3/8” thickness.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B        

SDS-Aggregate       

SDS-Pigment

Protect AM-UC-TG

Antimicrobial Trowel Grade Heavy Duty Urethane Concrete Mortar
Protect AM-UC-TG is a self-priming, three or four (with colorpack) component, trowel  grade, antimicrobial, Heavy Duty Urethane Concrete Mortar. Protect AM-UC-TG is typically installed at 5/16” to 3/8” thickness.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B        

SDS-Aggregate

SDS-Silica Blend       

SDS-Pigment

Protect AM-UC-LM

Antimicrobial Self Leveling, Medium-Duty Urethane Concrete Mortar
Protect AM-UC-LM is a self-priming, three or four (with colorpack) component, self leveling grade, antimicrobial, Medium Duty Urethane Concrete Mortar. Protect AM-UC-LM is typically installed at 1/8″ to 3/16″ thickness.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B        

SDS-Aggregate       

SDS-Pigment

Protect AM-UC-RP

Antimicrobial Slurry Grade Rapid Placement Urethane Concrete Mortar
A self-priming, three or four (with colorpack) component, slurry grade, Rapid Placement Heavy Duty Urethane Concrete Mortar. Protect AM-UC-RP is formulated specifically for ease of placement and leveling properties, while maintaining the durability required for demanding environments. Protect AM-UC-RP is typically installed at 3/16” to 1/4” thickness.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B        

SDS-Aggregate       

SDS-Pigment

Protect AM-UC-FC

Antimicrobial Urethane Concrete Mortar Finish Coat
Protect AM-UC-FC is a three or four (with colorpack) component, self leveling antimicrobial Urethane Concrete Finish Coat. Protect AM-UC-FC is typically installed at 15 to 25 mils atop a Protect UC urethane concrete broadcasted with silica sand aggregate.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B        

SDS-Aggregate       

SDS-Pigment

Protect 100 AM ESD HB

Antimicrobial ESD High-Build Epoxy System
Protect 100 AM ESD HB is a high solids, three-component, high-build antimicrobial epoxy resin system designed to facilitate electrostatic control. Protect 100 AM ESD HB is supplied with a blended cycloaliphatic amine curing agent that exhibits good UV and chemical resistance. This product produces a durable gloss finish.

(Click links below to view files)

Technical Data Sheet

SDS-A        

SDS-B        

SDS-Pigment

Protect 200 AM ESD UR

Antimicrobial Low-Odor, High-Solids ESD Urethane System
Protect 200 AM ESD UR is a very low odor, antimicrobial, three-component, chemical-resistant, aliphatic polyester ESD urethane coating designed to develop electrostatic control properties. Protect 200 AM ESD UR has been modified with an antimicrobial component that is integral to the manufactured product. The product is protected against bacterial and fungal growth. The antimicrobial properties will remain effective for the life of the product. Protect 200 AM ESD UR produces a non-yellowing, thin-film, satin finish and is available in a variety of colors and textures.

(Click links below to view files)

Technical Data Sheet

SDS-A        

SDS-B        

SDS-Pigment

Protect AM-JF-Epoxy

Antimicrobial Epoxy Joint Filler
Protect AM-JF-Epoxy is a three-component, antimicrobial, flexible epoxy joint filler. Packaging is available in pails for machine or hand mixing. Protect AM-JF-Epoxy has superior chemical resistance, thermal shock resistance making it ideal for use as a control joint filler for concrete joints and epoxy mortar as well as standard concrete horizontal surface cracks.

(Click links below to view files)

Technical Data Sheet

SDS-A       

SDS-B       

SDS-Pigment